 Virtins Sound Card Spectrum Analyzer
   
Author Company: VIRTINS TECHNOLOGY
Category:
Virtins Sound Card Spectrum Analyzer Virtins Sound Card Spectrum Analyzer is a powerful PC based virtual instrument ...
File Size: kB
OS: Windows 98 / NT / 2000 / ME / XP / VISTA
License: Shareware - Time Limit, free to try, 39.95 to buy.
Software Developed by VIRTINS TECHNOLOGY
 Download now ( kB)
 Click to buy via Regnow (39.95$)
Description :
Virtins Sound Card Spectrum Analyzer - Virtins Sound Card Spectrum Analyzer is a po Virtins Sound Card Spectrum Analyzer is a powerful PC based virtual instrument. It consists of a sound card real time oscilloscope and a sound card real time spectrum analyzer and can run them concurrently. Unlike most of the sound card oscilloscopes in the market which search trigger event after data collection, it features a specially designed data acquisition approach which is able to monitor the input signal continuously without missing any trigger event before the frame of data is collected. As a result, Virtins Sound Card Spectrum Analyzer boasts a very fast screen refresh rate (typically 50 frame per second) and thus a truly real time response. It supports sophisticated triggering method including pre-trigger and post-trigger which are generally missing from other sound card based instruments. 1. The dual-channel Oscilloscope, with all of the features of a modern digital storage oscilloscope, provides four types of views: (1) Real time wave form display of Channel A and Channel B. (2) Real time wave form display of Channel A + Channel B. (3) Real time wave form display of Channel A - Channel B. (4) Real time Lissajous Pattern display for Channel A and Channel B. 2. The dual-channel Spectrum Analyzer provides four types of views: (1) Real time Amplitude Spectrum display. (2) Real time Phase Spectrum display. (3) Real time Auto Correlation display. (4) Real time Cross Correlation display. with adjustable FFT points ranging from 128 to 32768 and selectable windowing functions such as Rectangle, Triangle, Hanning, Hamming, Blackman.
Frequency Range: up to 96 KHz (depending on Sound Card)
Bandwidth: 10 Hz - 96 kHz (depending on Sound Card)
Maximum Allowable Input Voltage (if connected directly): about 2 VAC (depending on Sound Card)
Selectable sampling frequency (up to 192 kHz), sampling bit resolution (8, 16 or 24 bits) and sampling channels (one or two) (all depending on Sound Card)
Four triggering modes: no trigger, repeated trigger, single trigger and slow trigger
Support triggering by leading edge or trailing edge at specified triggering level and on selected input channel
Support pre-triggering and post triggering from 0 to 100% of the selected record length
Continuously monitor the input signal such that no trigger event is missed before data collection
Can be used as a transient signal recorder to capture and store data for up to 500 s
Four view types: Real time amplitude spectrum display, Real time phase spectrum display, Real time auto correlation display, Real time cross correlation display
Independent X axis and Y axis zooming and scrolling
In amplitude spectrum display, Y axis supports relative display modes in linear and dBr scale, and absolute display mode in RMS voltage, dBV and dBu scale. X axis supports linear, logarithmic, octave, 1/3 octave, 1/6 octave, 1/12 octave and 1/24 octave scale
WAV file can be imported for display and analysis
Collected measurement data can be saved as WAV file or exported as TXT file
Data curve can be printed out directly or saved as BMP file
Support calibration of the input channels for different gain settings
Support adding notes to the measurement data
Fast display refresh rate: about 50 frames per second (tested under Windows XP SP2 on IBM ThinkPad R51 Laptop PC with Intel (R) Pentium (R) M processor 1.60 GHz, with scan time=10 ms and FFT size=1024 and both Oscilloscope and Spectrum Analyzer running under "no trigger" mode). Thus data are displayed and analyzed in "true" real time
The colors of display are configurable
Number of points to be collected per scan can be fine tuned at one point's resolution
FFT size can be adjusted from 128 to 32768 points
Allow record length to be different from FFT size. If the FFT size is greater than the record length, then zero will be added at the end of the actual measurement data during FFT computation. If the FFT size is less than the record length, then the measurement data will be split into different segments with the size of each segment equal to the FFT size. The final result will be obtained by averaging the FFT results from all segments
Support windowing functions: Rectangle, Triangle, Hanning, Hamming and Blackman
Display the peak frequency, Total Harmonic Distortion (THD), THD+Noise (THD+N), Signal in Noise and Distortion (SINAD), Signal-to-Noise Ratio (SNR) and cross correlation peak location and correlation coefficient
Support one cursor reader and two markers which stick to the measurement data
Options are provided to remove the DC component during spectrum analysis
Three inter-frame processing methods: None, Peak Hold, Averaging
Five chart types: Line, Scatter, Column, Bar, and Step
Support Multilingual User Interface under Windows 2000, XP, 2003 and above. Currently supported languages are English, French, German, Italian, Portuguese, Spanish, Simplified Chinese, Traditional Chinese, Japanese and Korean. Support only the local language and English under Window 95, 98, Me and Windows NT
This is the Shareware version. The full version can be purchased by clicking on the "Buy Now" button below for around $39.95 USD.
Click to buy from Regnow
    
| Download-soft.com awards: |  | | Doupload Editor`s rating: |  | | Editor`s Choice on GodMoon.com |  | |
Games download
Multimedia Software
Internet Software
Utilities for PC
Software for Desktop
Home and Education Software
Business and Finance
Software Development
Mobile and PDA
Software for MAC and UNIX
